in

How to Set Up LED Lights: A Step-by-Step Guide

Did you know that LED lighting uses up to 75% less electricity than other forms of lighting? By using less electricity, you can shrink your carbon footprint and save money every month on your energy bill.

Plus, LED lights come in tons of cool colors, and LED strip lights can help set the mood in any room, whether it’s your living room at home or the dining room in your restaurant.

Today, we’re going to talk about how to set up LED lights so that they’re exactly where you want them to be without falling down or creating a distraction.

Read on to learn how to set up your LED strip lights so you can enjoy energy-saving, mood-creating lighting for years to come!

Step 1: Choose Your LED Lights

First thing’s first: you need to find the right LED lights for you. Remember, classic LED lights create a white or yellow light, but there are tons of colorful options on the market to create a more vibrant aesthetic.

Even if you’re purchasing LED lights for home use, it’s best to find a brand that creates lighting for restaurants, event halls, and other commercial spaces. That way, you know that you’re getting the best, brightest, and most durable lighting on the market. Take a look at the LED lights sold on ellumiglow.com to find some of our favorite LED strip lights on the market!

Step 2: Find the Right Surface for Your LED Lights 

Once you have your LED lighting of choice, it’s time to decide where to hang it. Not all surfaces are suitable for LED lighting, so it’s important that you make your choice carefully and with long-term use in mind.

Rough or textured surfaces are not ideal for LED lighting, as the lighting may not remain flush with the surface. Some textured surfaces such as brick and wood may work as long as you find the right hardware to hold your LED lights in place. Additionally, surfaces that move, such as awnings or curtains, are also not ideal for LED lighting.

Surfaces that are better suited to your LED lights include ceramic tile, marble, metal, plastic, and standard, painted drywall. As long as the surface is smooth and flat, it should be perfect for your lights!

Step 3: Clean the Surface Before LED Light Installation

The best way to ensure that your lights are installed well and built to last is to clean the surface before you hang your lights. Wipe away any dust and debris on the surface. Then, feel free to use any cleaning solution that is best suited for your surface of choice.

We recommend using a clean cloth, preferably microfiber, to clean the surface with a cleaning solution. Then, make sure that the surface is completely dry before beginning the next step. You may want to wait approximately one hour to ensure that the surface is dry.

Step 4: Unroll and Attach Your LED Strip

LED strip lights come rolled for your convenience. This helps to prevent tangling or tearing. It may be best to leave your lights on the roll until you are ready to hang them, and you can even unroll them as you attach them to the wall.

Some LED strip lights come with an adhesive backing that allows you to attach them directly to the wall. If this is the case, you can remove the protective sheet from the adhesive backing and begin to stick the strip to the wall or surface. Make sure that you attach it slowly and avoid any bumps or curves that could cause the lights to come loose.

Even if you do have LED lights with an adhesive backing, it can be helpful to add some extra hardware to hold your lights in place. That way, even if the adhesive glue loses its stickiness over time, your lights will remain in place.

Check with the manufacturer or your lights to see if they sell hardware that is specifically designed for your lights. Oftentimes, this hardware is made of plastic or metal. The lights can be hooked to or fed through the hardware, which can then be screwed to the wall.

One DIY alternative is placing nails just below the LED lights every few inches, although this may not keep your lights in a straight, flat line. 

Step 5: Connect Your LED Lights to a Power Source

Finally, it’s time to connect your LED lights to a power source! If your LED lights are battery-operated, make sure that you have backup batteries on hand or the charger for rechargeable batteries. 

For plug-in LED lights, you’ll want to choose your power source strategically. LED strip lights create a magical and even mysterious glow, but the illusion can be ruined by a visible power cord!

If possible, feed the power cord behind something else–whether it’s decor, a wall hanging, or even a television. Make sure to fold up and wrap any excess length that you don’t need so that it isn’t dangling. 

Learn How to Set Up LED Lights the Right Way for Years of Lighting Fun

LED lighting is a great solution for anyone hoping to lower their carbon footprint, lower their energy bill, or set a fun and relaxing mood in their home or business. With our guide, you can ensure that you’ve set up LED lights the right way and get the most out of your LED lights for years to come!

Looking for more ways to spice up your home, your business, or your lifestyle? Take a look around for helpful content and news. Be sure to bookmark our page and check in with us often, since we’re adding new content every single day!

(Visited 2 times, 2 visits today)

What do you think?

100 points
Upvote Downvote

Leave a Reply

Your email address will not be published. Required fields are marked *

Do Termites Bite People? Signs of a Termite Infestation

How does Learning a Language Improve Career Growth Prospects